Seagate hard drive terminal error messages

[peter_sany]

* The hard drive is detected normally* Undetected due to firmware module loss-ATA loss* Undetected due to Capacity parameters lostFailed sys sect. write
Failed sys sect. Write
Master

* 43 47 Errors before hdd recognition* Error After HDD Recognition* NOT INTERFACE AGE
This message tells the hdd is under selftest process and we need to check the following AGE value and learn how to move forward.

* AGE=60
AGE=60 is usually caused by a damage in the head adaptive data and failure in loading it. After the drive startup, enter level T command mode, use T>R command

Seagate F3 Terminal Error Messages


? 7200.12 Thick HDD 1T
Fix No HOST FIS-ReadyStatusFlags
HOST,
No HOST FIS-ReadyStatusFlags 2002A1A5
ASCII Diag mode

* Init SMART Fail
LED:000000CC FAddr:0024E4A3
Reset SMART but fail like following?
F3 1>N1
Init SMART Fail
LED:000000CC FAddr:0024E4A3
LED:000000CC FAddr:0024E4A3
LED:000000CC FAddr:0024E4A3
LED:000000CC FAddr:0024E4A3
(When LED CC occurs, this means the firmware area cannot be accessed and used or interruption during the firmware operation, users are suggested to change one command and try)

* RW: Error processing Performance Parameter File: 203C
No Phy: Staggered spin bypass

* 5400.6 RW Err

RW cmd 0002 req = 19 00 00 00 01 00 00 00 00 00 00 00 19 61 08 00 98 8E 08 00 99 61 08 00
opts = 00001121

RW Err = 43110081

RW cmd 0002 req = 77 49 00 00 01 00 00 00 00 00 00 00 80 AE 05 00 FF AE 05 00 80 AE 05 00
opts = 00001121

RW Err = 43110081

RW cmd 0002 req = 5F 49 00 00 18 00 00 00 00 00 00 00 19 61 08 00 FF FF 17 00 19 61 08 00
opts = 00001121

RW Err = 43110081
RW error suggests usu



EarlySpinup Enabled
Rst 0x10M
ExecuteSpinRequest

LED:00000067 FAddr:00380338
LED:00000067 FAddr:00380338^z

LED:00000067 FAddr:00380338^z

LED:00000067 FAddr:00380338

Drive hangs after trying to read firmware. Connect separately the PCB, after the /T appears, the LED 67 error apprears again:
LED:00000067 FAddr:00380338 LED:00000067 FAddr:00380338

So this can be the failure of PCB and ROM.

* 7200.11 RW subfile error 205f Fix

(Message?
7200.11
Rst 0x10M
RW subfile error 205f
RW subfile error 205f
ASCII Diag mode

* Rst 0x10M

RW: Disc Ctlr Initialization Completed.
(P) SATA Reset
SIM Error 1009

[Alisha78]

hello sir,
thank you for your support. lots of love..

?